Find vs(t) in the circuit of Fig. 9.56 if the current ix through the 1-? resistor is 8 sin 200t A.
 FIGURE 1.png)
 ANSWER.png)
You might also like to view...
The primary purpose of ties in a reinforced concrete column is to
A) increase the shear resistance of the column. B) prevent the buckling of vertical reinforcement in the column. C) prevent the crushing of concrete. D) none of the above.
The formula for the cross-sectional area of a specimen at the middle is ____.
A. pi times the diameter B. pi times the radius C. pi times the diameter squared D. pi times the radius squared
Two technicians are discussing catalytic converters. Technician A says that the exhaust mixture must fluctuate between rich and lean for the best efficiency. Technician B says that the air-fuel mixture must be leaner than 14.7:1 for best performance from a three-way catalytic converter. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
The first step in developing ladder logic solutions is to ________
A) Identify the trigger used for the calculations B) Describe the numerical solution C) Write the process description D) Determine the standard ladder logic