Name four precautions you should take when using a puller.

What will be an ideal response?


1. Wear eye protection.
2. When heating a part to help free it, do not heat the jaws of the puller. This could change the temper of the metal.
3. Be sure the pressure screw is clean and lubricated before using an impact wrench.
4. Be sure the removable point is installed on the puller shaft tip.
5. Be sure the puller is aligned so it is perpendicular to the part being pulled.
6. Do not use a puller with damaged or worn parts.
7. Use the correct size puller so overloading is avoided.
8. Use a 3-jaw puller instead of a 2-jaw puller when possible.

Trades & Technology

You might also like to view...

What are some of the legal impediments caused by the widespread adoption of BIM in the construction industry?

What will be an ideal response?

Trades & Technology

A T-8 fluorescent tube is __________ inch(es) in diameter.

a. 5/8 b. 1 c. 1.5 d. 2

Trades & Technology

Which EVAP valve(s) is (are) normally closed?

A) Canister purge valve B) Neither canister nor canister vent valve C) Both canister purge and canister vent valves D) Canister vent valve

Trades & Technology

Two types of electronic air filter units include

A) active and passive B) statically charged and dynamically charged C) absorption and hyperbolic D) ionizing plate and charged media

Trades & Technology