The proper grease to use with CV joints is ________.
A) Dark blue EP grease
B) Black chassis grease
C) The grease that is supplied with the boot kit
D) Red moly grease
C) The grease that is supplied with the boot kit
You might also like to view...
Insufficient slave cylinder travel means ________ in the system.
A) Air B) Too much fluid C) Loose metal D) A bad O-ring
Elbows are _____.
a. flexible joints in a pipe system b. the same as blind flanges c. fittings that change pipe direction by 90 degrees d. fittings that stop flow at a pipe junction
To sterilize terrarium soil, it should be placed in an oven at _____
A) 165°F for 30 minutes B) 170°F for 20 minutes C) 180°F for 30 minutes D) 190°F for 20 minutes
Answer the following statement(s) true (T) or false (F)
1. The wound-rotor induction motor and the squirrel-cage induction motor both were developed for variable speed applications. 2. To minimize the starting surge of current to a wound-rotor induction motor, insert the full resistance of the speed controller in the rotor circuit. 3. If the full resistance of the speed controller is inserted into the rotor circuit when the motor is running, the rotor current decreases and the motor slows down. 4. As resistance is removed from the rotor circuit, the rotor speed will continue to increase until its speed matches the synchronous speed of the field developed by the stator windings. 5. The starting torque output of a wound-rotor induction motor is poor when all resistance is removed from the rotor circuit.