Two technicians are discussing bump steer. Technician A says that an unlevel steering linkage can be its cause. Technician B says that if the steering wheel moves when the vehicle is bounded up and down, the steering linkage may be bent. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician
C
You might also like to view...
A wide band oxygen sensor is used to ________
A) Help improve fuel economy by allowing the engine to operate at a lean air-fuel ratio B) Help the engine meet achieve ultra-low emission vehicle (ULEV) rating C) Help the engine achieve a super ultra-low emission vehicle (SULEV) rating D) All of the above
A central station air-handling unit:
A) Is used instead of a fan and fan motor. B) Consists of a fan and coil and usually handles a single room or zone. C) Is used for large systems and is assembled on site using separate components. D) Combines the functions of the evaporator blower and the condenser blower.
Use Data 12 sheet in text book.Mixed number Example: 2-1/3Put a dash between the whole number and the fraction.Simple Fraction Example: 2/3 Calculate the allowance for a 45 degree butt weld elbow on 3" pipe.
Fill in the blank(s) with the appropriate word(s).
The schematic symbol for the triac is similar to the connection of the two ____.
a. diacs b. SCRs c. transistors d. gates