Name the dimensioning system that is a form of rectangular coordinate dimensioning without dimension lines in which size and location dimensions from datums or coordinates (x, y, z axes) are given in a table identifying features on the drawing.
What will be an ideal response?
Tabular dimensioning.
You might also like to view...
What is an escape ramp
Cdl
The type of shop that is most likely to have access to the latest manufacturer bulletins and technical information is _________
A) New truck dealership B) New car dealership C) Large fleet D) All of the above E) None of the above
Insurance companies established the ______________________________ organization in an effort to reduce the number of fires caused by electrical equipment.
Fill in the blank(s) with the appropriate word(s).
A logic control system in an automobile generates an audible alarm when any one, two, or three of the following three conditions occur:
1. The ignition is off but the ignition key has not been removed from the switch and a door is opened. 2. The headlamp switch is on with the ignition off and the key removed from the switch. 3. The ignition is on with the engine running but the driver's seatbelt has not been fastened. Detection circuits generate HIGH inputs to a 3-input logic gate when any of these conditions occurs. The logic gate responds to the high input(s) by generating a HIGH output that triggers the alarm. The 3-input logic gate is most likely a(n): A) OR gate. B) NOR gate. C) AND gate. D) Inversion device.