A ____ is equal to one-millionth (1/1,000,000) of an ampere.
A. nanoampere
B. picoampere
C. microampere
D. milliampere
Answer: C
You might also like to view...
Which of the following is developed by a fan or blower installed in the vent path?
a. draft b. dilution air c. natural draft d. mechanical draft
Technician A says that it is recommended that the vehicle be driven less than 50 mph for the first 50 miles to allow the tire to adhere to the wheel. Technician B says that sudden hard acceleration with newly mounted tires can cause the tire to change position on the wheel. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
When flushing the system, you should:
A) Always flush through the accumulator to remove accumulated debris. B) Flush through the entire system through the service valves. C) Flush through the compressor first. D) Disconnect the lines and flush through them separately.
A standard number 2 pencil works well for sketching with a slightly rounded point.
Answer the following statement true (T) or false (F)