Considering the dimensions of a block face to be 15 5/8" long and 7 5/8" wide and assuming mortar joint width to be 5/16" for both bed joints and head joints, what is the length in inches of 6 block faces and 5 mortar joints?
What will be an ideal response?
95 5/16
Trades & Technology
You might also like to view...
A P0107 DTC is being discussed. Technician A says a that defective MAP sensor could be the cause. Technician B says that a MAP sensor signal wire shorted-to-ground could be the cause. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Trades & Technology
Runlevel ____ is multiuser mode enabling graphical access via X Window.
A. 2 B. 3 C. 4 D. 5
Trades & Technology
In an air vane governor, the governor spring is connected to the ____________________ linkage.
Fill in the blank(s) with the appropriate word(s).
Trades & Technology
Orthographic projection in which the right-side view is shown to the right of the front view is
A. First-angle projection B. Third-angle projection
Trades & Technology