One of the most important tasks that a service technician must learn is how to safely work around equipment when the power is being supplied to the equipment.
Answer the following statement true (T) or false (F)
True
You might also like to view...
What is the depth of the counterbore for the hole shown below?
a. .250??
b. .510??
c. .315??
d. None of the above
A 10,000-square foot turfgrass installation that needs 2.0 inches of water each week is irrigated by a system that delivers 8 gpm. How long will the irrigation system run in order to deliver 2.0 inches of water?
a. 16 hours, 3 minutes c. 1,563 hours b. 12 hours, 48 minutes d. 26 hours, 3 minutes
You need to determine i* per year for the cash flows shown below. Since you have a new boss, you decided to perform a thorough analysis. Do the following:
(a) Use a spreadsheet to find i*.
(b) Develop two charts on the spreadsheet: a column chart that plots cash flows versus year, and a scatter chart showing PW values versus a range of i values, one of which is i*. (Hint: Use Figure 7–4 as a guide.)
(c) You were told when handed the estimates that the rate of return was about 25%. Determine the cash flows for years 2, 3, and 4 that are necessary to realize an i* of 25% per year, if they remain in the same proportion to each other as initially estimated.
 FIGURE 1.png)
The amperage draw of an electric fuel pump is higher that specified. All of the following are possible causes EXCEPT ________
A) Corroded electrical connections at the pump motor B) Clogged fuel filter C) Defective fuel pump D) Restriction in the fuel line