In platform-frame construction, the wall framing, floor framing, and roof framing have one thing in common in that each is made of closely-spaced, parallel lumber members that are joined together at each end by a continuous cross member that is perpendicular to the parallel members. Name the cross members in wall framing, i.e., the members that connect the studs together.

What will be an ideal response?


Double top plate at the top of studs and the bottom plate at the bottom of studs.

Trades & Technology

You might also like to view...

As a means of ensuring that legislators stay in touch with the mood of the people, state constitutions

A. were rewritten once every 10 years. B. were rewritten once every five years. C. required yearly visits to the homes of their constituents. D. stipulated that ordinary legislation could override the constitution. E. required the annual election of legislators.

Trades & Technology

If you are constructing a building where siding will be applied over the sheathing, you should use sheathing with a minimum thickness of _____.

a. 3/8" b. 1/2" c. 5/8" d. 1"

Trades & Technology

The sum of two numbers is 13. Five times one number is equal to eight times the other number. Find the two numbers.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

What controls the length of the defrost cycle on most commercial refrigeration systems?

A) The high-pressure switch B) The defrost termination thermostat C) The evaporator fan motor D) The defrost timer

Trades & Technology