Technician A says that if the oil pressure warning light is on, the oil pressure should be checked with a manual gauge . Technician B says that a faulty electrical circuit could cause the oil pressure warning light to come on even when the oil pressure is good. Which technician is correct?
A) Technician A only B) Technician B only
C) Both Technicians A and B D) Neither Technician A nor B
C
You might also like to view...
The strength or classification of a bolt is known as ________
A) Pitch B) Gauge C) Grade D) None of these
The match of the motor and compressor inside a hermetic compressor:
A) Is typically 1 hp per ton for nearly all applications. B) Is specific for the application of the compressor. C) Is generally not critical, allowing a single compressor to cover a wide range of applications. D) Is made in the field by the installing technician.
What happens to the temperature of water once it starts to boil?
A) The water temperature stays the same once the water begins to boil. B) It increases to 1°F above the boiling point. C) It increases above the boiling point in proportion to the amount of heat added during the boiling process. D) The water temperature decreases after the water begins to boil.
Describe the purpose of a track bar in a rear suspension system.
What will be an ideal response?