Before removing the alternator, what should the technician do first?
A) Remove the alternator adjustment bolt (if equipped)
B) Disconnect the output wire from the alternator
C) Disconnect the negative battery cable
D) Loosen the accessory drive belt
C
You might also like to view...
A set of burned or pitted contacts can cause a(n) ____________________ across the contacts.
Fill in the blank(s) with the appropriate word(s).
The subsequent problems deal with the circuit and timing diagram below.
What is F at a?
A. 1 B. uncertain C. 0
A pressure-temperature defrost control is activated by the ____.
A. difference of the pressure in the fan compartment and the temperature of the coil B. difference in pressure between the outdoor pressure and the fan discharge pressure C. difference in the pressure of the air through the outdoor coil D. difference in pressure of the refrigerant in the condenser and the pressure in the coil
A dimension that is theoretically perfect with no tolerance is a ________
Fill in the blank(s) with the appropriate word(s).