Springback is a term used to describe the _____.
a. return of the bender shoe to its normal position after a bend
b. reaction of a power bender after the machine is jogged
c. tendency of the conduit to relax to a slightly looser bend angle when the bender is
released
d. amount of take-up required for a sweep bend
c. tendency of the conduit to relax to a slightly looser bend angle when the bender is
released
You might also like to view...
Noncondensable gases ____.
A. are desirable in a refrigeration system B. are undesirable in a refrigeration system C. condense readily under normal atmospheric conditions D. help in pulling a vacuum
Electrical installation criteria and wiring methods for health care facilities are ____ for a standard commercial or industrial project.
A. far more specialized than B. the same as those C. a subset of those D. less specialized than
During calibration, if a HART® transmitter is using a damping factor, it must be set to _____
A) 25 B) 100 C) 0 D) 75
Solve and reduce all answers to lowest terms: 7/8 + 3/4 + 1/16 + 1/8 =
What will be an ideal response?