Tube-in-tube, shell-and-coil, and shell-and-tube are all different types of:
A) Evaporative condensers. B) Air-cooled condensers.
C) Water-cooled condensers. D) Natural-draft condensers.
C
You might also like to view...
What type of flooring surface is best to work on when using power tools?
a. concrete c. dirt b. wood d. none of these answers is correct
An arc is always dimensioned by giving the ____.
A. radius B. tangent C. diameter D. perspective
Machine baseline vibration data, used for analyzing vibration signatures, should be established during initial start up and when a machine is new or ________
A) before a machine is repaired B) during monthly inspections C) during weekly inspections D) after a machine has been repaired
Inspect your cargo after you have driven
1) 25 miles or 50 miles depending on the law in the state you are in, then again after 3 hours or after you have driven 150 miles and after every stop for a break. 2) 75 miles. 3) 150 miles.