A technician is wiring a circuit that requires a DAC. Two DAC's are available with the proper full-scale output. His requirements are for small resolution values and precision in the analog output. Generally, the DAC with the ________ step size and the ________ percent of resolution should be selected
A) smallest, largest B) largest, largest C) largest, smallest D) smallest, smallest
D
You might also like to view...
On a small to medium-sized project, the ____ sheet can be used as a checklist that allows the estimator to choose those items that are required on the project under consideration.
A. Detail Expense B. Job Expense C. General Expense D. Overhead Expense
Which type of bone may be approximately as large around as it is long?
a. Irregular bones c. Long bones b. Short bones d. Flat bones
How does a weighted average meter measure alternating current?
A) It takes an average over a short period of time. B) It measures the current's ability to lift a small weight inside the meter. C) It reads the current at the test point and applies an averaging factor. D) It calculates the root mean square value of the current.
One problem with thermistors is that their response to changes in temperature is
A) non-linear. B) too slight to measure. C) erratic. D) digital.