The first tack weld on a 90-degree ell should be at the _____ position.
a. 3 o'clock
b. 6 o'clock
c. 9 o'clock
d. 12 o'clock
d. 12 o'clock
You might also like to view...
The vertical distance between contour lines is called the _________________________
Fill in the blank(s) with correct word
The best time to discuss your graduation plan with your advisor is during the year in which you plan to graduate.
a. True b. False
Answer the following statement(s) true (T) or false (F)
1. Transistors are made by joining two pieces of semiconductor material together. 2. If the polarity of the output of the ohmmeter leads is known, the transistor can be identified as either NPN or PNP. 3. If a very high resistance is indicated by the ohmmeter, the transistor is shorted 4. With a transistor, the amount of base-emitter current is small when compared to the collector-emitter current. 5. An analog device can be adjusted to different states.
The pulse generator ________
A) Is used as a tachometer reference signal by the computer and has no other function B) Signals the electronic control unit (module) C) Fires the spark plug directly D) Signals the computer that fires the spark plug directly