The three phases of diesel ignition include ________
A) Ignition delay, rapid combustion, controlled combustion
B) Glow plug ignition, ignition delay, controlled combustion
C) Glow plug ignition, fast burn, slow burn
D) Slow burn, fast burn, slow burn
A
You might also like to view...
The greatest lift height is provided by the _____ forklift.
a. warehouse b. fixed-mast c. telescoping boom d. four-wheel drive
Write the SPC equations used to develop an x-bar chart.
What will be an ideal response?
The dimensions of an enclosed gabled building are shown in Figure P2.13a. The external pressures for the wind load perpendicular to the ridge of the building are shown in Figure P2.13b. Note that the wind pressure can act toward or away from the windward roof surface. For the particular building dimensions given, the C p value for the roof based on the ASCE standard can be determined from Table P2.13, where plus and minus signs signify pressures acting toward and away from the surfaces, respectively. Where two values of C p are listed, this indicates that the windward roof slope is subjected to either positive or negative pressures, and the roof structure should be designed for both loading conditions. The ASCE standard permits linear interpolation for the value of the inclined angle of
roof ?. But interpolation should only be carried out between values of the same sign. Establish the wind pressures on the building when positive pressure acts on the windward roof. Use the following data: basic wind speed = 100 mi/h, wind exposure category = B, K d = 0.85, K zt = 1.0, G = 0.85, and C p = 0.8 for windward wall and –0.2 for leeward wall.
General construction section elevation plans show what the building looks like from various views.
Answer the following statement true (T) or false (F)