In a case where all surfaces on a part are to be machined, a general note such as ___________________________________ may be used and the individual symbols may be omitted on the drawing.
Fill in the blank(s) with the appropriate word(s).
FINISH ALL OVER (FAO)
You might also like to view...
The ____ joint is often the best choice for horizontal butt welding.
A. double V B. square C. double J D. bevel
An electric stove with four burners and an oven is used in preparing a meal as follows.
Burner 1: 20 minutes Burner 2: 40 minutes Burner 3: 15 minutes Burner 4: 45 minutes Oven: 30 minutes If each burner is rated at 1.2 kW and the oven at 1.8 kW, and electricity costs 12 cents per kWh, calculate the cost of electricity used in preparing the meal.
One of the most practical and widely used methods of producing internal threads is to cut them with a round, formed, thread-cutting tool called a ____.
A. binder B. bore C. grinder D. tap
Antijackknife devices can prevent skidding.
Answer the following statement true (T) or false (F)