Clutch chatter can be caused by ________.
A) Too little free play in the clutch pedal
B) Grease or oil on the clutch facing
C) Low hydraulic fluid level
D) Broken engine mounts
B) Grease or oil on the clutch facing
You might also like to view...
Which of the following cmvs are most likely to get stuck at a raised railroad crossing
a. moving van b. lowboy c. car carrier d. all of the above
Which of the following statements is LEAST-Likely true?
A. Pipes can be joined together with a coupling. B. A small length of pipe with male threads on each end is called a nipple. C. When one pipe is joined to two other pipes, the fitting is called a "V". D. A female pipe coupling that makes a turn is called an elbow.
What inputs may the PCM look at to determine the need to engage the cooling fan?
What will be an ideal response?
The designation ".50-13 UNC-2A" means ____.
A. the minor diameter of the thread is 0.50 inches, there are 13 threads per inch, the classification is Unified National coarse, general purpose moderate tolerance, external thread B. the major diameter of the thread is 0.50 inches, there are 13 threads per inch, the classification is Unified National coarse, general purpose moderate tolerance, internal thread C. the major diameter of the thread is 0.50 inches, there are 13 threads per inch, the classification is Unified National coarse, general purpose moderate tolerance, external thread D. the major diameter of the thread is 0.50 inches, there are 13 pitches per inch, the classification is Unified National coarse, general purpose moderate tolerance, external thread E. none of the above