The addressing mode that specifies the address of the operand is ________
A) inherent addresing B) direct addressing
C) immediate addressing D) memory addressing
A
You might also like to view...
A low steady reading on a vacuum gauge connected to the intake manifold of an operating engine may be caused by
A. Retarded ignition timing B. A restricted exhaust C. Incorrect valve timing D. Both A and C
There is no need to check for the maximum 25-ohm requirement for concrete-encased electrode because ____ under the concrete foundation ensures a low-impedance direct connection to earth.
a. dryness b. cold c. darkness d. moisture
The Paul JK Company designs custom lifting devices. The winch shown in Figure 12.46 was designed to lift a weight, W, of 1 200 lbf. The weight of the boom AB may be neglected for this analysis. The cable is reeled in and out at C. Find the magnitudes of cable tension T and the resultant pin reaction at A.
 FIGURE 1.png)
Carry the answer to three decimal places. The weight of a spool of wire is 27.11 pounds. The spool weighs 3.2 pounds. Find the cost of the wire per pound if the cost of the spool of wire is $74.44. Express the answer to the nearer tenth of a cent.
Fill in the blank(s) with the appropriate word(s).