In an OBD II system, when all enabling criteria for a given diagnostic is met, it's considered which of these terms?
A) A tuned engine B) A freeze frame
C) A trip D) A warmed-up engine
C
You might also like to view...
The end of a pipe may be cut square, or it may be ____.
A. trimmed B. galvanized C. beveled D. reversed
The center of the cone, pod, nut, and fruit wreath is left open and filled with _____ placed upside down
A) nuts B) seeds C) pine cones D) all of the above
?The useful life of a ceramic nozzle is affected by the _____________.
A. ?tungsten type and shielding gas flow rate B. ?whether the torch is air or water cooled C. ?current level and proximity to the work D. ?type of current and type of base metal
Determine the required slab thickness, according to the AASHTO Alternate Design Method, for a rigid pavement being designed near Jacksonville, Florida, for the following input data:
Estimated future traffic load = 10,000,000 ESALs Design reliability = 95% Overall standard deviation = 0.39 Initial serviceability index = 4.5 Terminal serviceability index = 2.5 Effective subgrade modulus = 250 lb/in2 Mean concrete modulus of rupture = 700 lb/in2 Mean concrete elastic modulus = 4,200,000 lb/in2 Joint spacing = 20 ft Base modulus = 25,000 lb/in2 Base thickness = 6 inches Slab width = 12 ft supported by asphalt concrete shoulders What will be an ideal response?