What type of liner is required in an acid tanker?
A. stainless steel
B. non-reactive
C. non-toxic
D. mild steel
Answer: B
You might also like to view...
A large corporation will often publish an addendum to ASME or ISO standards. List the four items the addendum typically covers.
What will be an ideal response?
When selecting a point to tie off your own body harness, you should always choose an anchorage point that is _____.
a. at least 20' above where you will be working b. directly below your working position c. capable of supporting at least 5,000 pounds d. low enough to allow you to drop to the ground from the end of your lanyard
Piston ring gaps should be ____degrees apart on the piston during installation.
A. 90 B. 180 C. 60 D. 120
To secure two pieces of sheet metal together, a technician may use a(n) ____________________ screw since no pre-drilling is required.
Fill in the blank(s) with the appropriate word(s).