____ does not need capillary action to pull filler metal into the joint.
A. Brazing
B. Soldering
C. Braze welding
D. Hard surfacing
Answer: C
You might also like to view...
Technician A says that loose fan belts are usually destroyed more rapidly than belts that are adjusted too tight. Technician B says that too tight adjustment on poly-V fan belts can destroy bearings. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
Technician A says that hypoid gears drive forward on the convex side of the crown gear teeth. Technician B says that hypoid gearsets require EP rated mineral base lubes only and synthetics are not yet approved. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
Technician A says the transmission fluid level may have to be checked with a special procedure if there is no dipstick. Technician B says if the ATF has a dark color and a burnt smell it indicates that a transmission rebuild is needed. Who is correct?
A. A only C. Both A and B B. B only D. Neither A nor B
To determine the correct connector size for MC cable, _____.
a. use the correct color coded connector b. refer to the manufacturer's literature c. check the NEC® code d. use the smallest connector that will fit the conductor