Technician A says etching is a discoloration or removal of some material caused by corrosion or some other chemical reaction. Technician B says thrust washers should be replaced with new ones if they are pitted or scored. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B
Answer: C
You might also like to view...
Most A/C performance tests include ________.
A) Measure ambient temperature 3 inches (80 mm) in front of the condenser and measure the humidity B) Start the engine, set the parking brake, and raise the idle to 2,000 RPM C) Open the doors and set the blower speed to high which applies the maximum load on the system D) All of the above
It takes 120 to 150 chinchilla pelts to make a full-length coat
Indicate whether the statement is true or false
Technician A says that the front wheels are able to rotate through 60-80 degrees of rotation. Technician B says that turning the steering wheel all the way left then all the way right is turning the wheel "lock to lock." Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Stocker operations feed little or no grain.
Answer the following statement true (T) or false (F)