Technician A says that the driving side of the ring gear is convex shaped. Technician B says that the coasting side of the ring gear is convex shaped. Which technician is correct?
A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician
A) Technician A only
You might also like to view...
Give the desired approach for starting to make a livestock placing.
What will be an ideal response?
Use the following engine dimensions to calculate the compression ratio
Bore: 5.500 in. Stroke: 6.500 in. Clearance Volume: 8.77 in^3 A) 18.7:1 B) 18.4:1 C) 18.5:1 D) 18.6:1
In an AND gate, the number of input state combinations equals . The "n" represents the ________
Fill in the blank(s) with correct word
A building requires a pump with a head pressure of 15 feet and a flow rate of 12 gallons per minute. Which of the following pumps should be used, based on the supplied performance data?
A) Total head pressure range: 32 to 8 feet; flow rate: 0 to 8 gallons per minute B) Total head pressure range: 16 to 2 feet; flow rate: 0 to 14 gallons per minute C) Total head pressure range: 8 to 0 feet; flow rate: 0 to 10 gallons per minute D) Total head pressure range: 12 to 3 feet; flow rate: 0 to 32 gallons per minute