The highest level of finish that is recommended for gloss, semigloss, enamel, or nontextured flat paints is
_____.
a. Level 0
b. Level 3
c. Level 4
d. Level 5
d
You might also like to view...
Develop a simplified form of the general steady-state energy balance appropriate for each operation. State carefully, and justify, any assumptions you make.
A list of common unit operations follows: (a) Single-pipe heat exchanger (b) Double-pipe heat exchanger (c) Pump (d) Gas compressor (e) Gas turbine (f) Throttle valve (g) Nozzle
In a ____, a simple switch is used to control the power applied to a small motor.
a. one-wire control circuit b. two-wire control circuit c. three-wire control circuit d. tone-control circuit
An alkaline soil contains 20% clay and 3% humus. If the pure clay has a CEC of 40 cmolc/kg and the humus 200 cmolc/kg, calculate the CEC/kg of the soil
A) 30 B) 16 C) 12 D) 14 E) 8
Technician A says to always purchase replacement tires with the same or greater speed rating as when the vehicle was new. Technician B says to install the same type of tire (example: m+s) on all wheels. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B