The development of the auxiliary view is sometimes shown by lines projected ___________________ from the slanted surface.
Fill in the blank(s) with the appropriate word(s).
perpendicularly
You might also like to view...
When these types of sketches provide a three-dimensional representation of an object where the surface features or the axes of the objects are drawn at equal angles (30° from horizontal), you are sketching the:
a. isometric view b. pictorial view c. view alignment d. multiview
The amount of magnetic flux produced by one object that influences another is called magnetic ____.
a. coupling b. induction c. current d. balance
The design speed of a multilane highway is 60 mi/h. Determine (a) the minimum stopping sight distance that should be provided for a level roadway, and (b) the minimum stopping sight distance that should be provided for a roadway with a maximum grade of 7 percent. Note: the term a/g in the appropriate equation is typically rounded to 0.35 for calculation purposes. Assume perception reaction time = 2.5 sec.
The minimum sight distance required in these cases is the stopping sight distance (SSD), given by Equation 3.27:
where u = design speed (mi/h)
t = perception-reaction time (sec)
a = rate of deceleration (taken as 11.2 ft/sec2)
g = gravitational acceleration (taken as 32.2 ft/sec2)
G = grade
What will be an ideal response?
When looking for the quality of materials and methods of construction for a floor assembly, you would refer
to the _____. a) specifications b) foundation plan c) floor plan d) structural drawings