Single-variable control loops consist of what element(s)?
a. Final Control Element
b. Controller
c. Measuring Device
d. Transmitter/Transducer (for sure not this one)
e. All of these
e. All of these (Several process variables are controlled at once in a typical production machine Usually, only one individual feedback loop is required to control each variable Single-variable control loops consist of the following elements: Measuring device, Transducer/transmitter, Controller, Final Control Element.)
You might also like to view...
A large company consists of 10,000 employees, and an infrastructure needs to be created to broadcast messages to all the employees. If an AMPS system is to be used for such a broadcast, what may be the possible alternate scheme if
(a) All employees are located in the same city? (b) Fifty percent of employees are in one location, while the remaining 50% are in another place? (c) Twenty-five percent of employees are located in four different locations? (d) People are spread all over the world?
If two separate receptacles having different voltages and amperage ratings are installed in a single boat slip, the total load calculation must include _____.
a. only the receptacle with the lower VA demand b. both receptacles c. only the receptacle with the higher VA demand d. the receptacle farthest from shore
Technician A says erratic power steering pump pressure may be caused by a sticking flow control valve. Technician B says small metal burrs may be removed from the flow control valve with crocus cloth. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
In wood frame construction, preparation for hanging cabinets involves the installation of _____
a. backing boards b. support rails c. metal hangers d. T-braces