To forward bias a silicon diode ________
A) The voltage at the cathode must exceed the voltage at the anode by 0.3 to 0.5 volt
B) The voltage at the anode must exceed the voltage at the cathode by 0.5 to 0.7 volt
C) The voltage at the anode must exceed the voltage at the cathode by 0.3 to 0.5 volt
D) The anode must be connected to a resistor (300-500 ohms) and 12.0 volts, with the cathode also connected to 12.0 volts
B
You might also like to view...
What is the process used to weld a V-groove in spiral pipe?? ?
What will be an ideal response?
The 2147 4k × 1 static RAM contains 4096 storage locations storing one bit each. How many 2147 RAM memory chips are needed to configure a 64k × 8 memory?
A) 128 B) 64 C) 256 D) 8
If the angle between the rise and the diagonal is 22-1/2 degrees, what is the angle between the run and the diagonal?
Fill in the blank(s) with the appropriate word(s).
What level of tach reference information is required in order for the PCM to properly control a distributor ignition system?
A. Level one information indicating that "a pair" of cylinders' pistons are approaching TDC B. Level two information indicating "which pair" of cylinders' pistons are approaching TDC C. Level three information indicating which cylinder of the piston pair approaching TDC is on the compression stroke D. None of this information is required in order for the PCM to control a distributor ignition system