Why might opening the acetylene cylinder's square stem valve three-and-a-half turns with a wrench and leaving the wrench on the valve while working create a hazardous situation?
A) The valve should be opened less than two-and-a-half turns.
B) The valve should be opened at least four turns to minimize internal pressure.
C) The wrench should be removed from the valve while soldering.
D) The wrench should not be used on a square stem valve.
A
You might also like to view...
The temperature at which a flammable liquid's vapors will ignite when brought into contact with an open flame is called the _____ point.
What will be an ideal response?
Define electronics.
What will be an ideal response?
A system that uses electronic components with no moving parts can be described as:
A) Modulating logic. B) Pneumatic logic. C) Solid-state logic. D) Relay logic.
Most likely gripper to use if heavy metal parts with a rough surface must picked up
A) Vacuum grippers B) Finger and bellows grippers C) Parallel and angular grippres D) Pin and mandrel grippers E) All of the above