In general, how much endplay should ball-bearing motors have?

a. 1/32" to 1/16"
b. 1/4" to 1/2"
c. 5/8" to 3/4"
d. 1" to 1-1/4"


a. 1/32" to 1/16"

Trades & Technology

You might also like to view...

Estimate the avoided yearly CO2 emissions from the following:

a. Switching from a single 60-watt incandescent bulb that burns for 6 hours per day to a 13-watt CFL. b. Using pure biodiesel instead of motor gasoline for an automobile that travels 60,000 miles per year with a fuel economy of 28 mpg. c. Replacing an air conditioner with an EER of 11 with a unit that has an EER of 14, if the cooling load is 22 million Btu per year. d. Upgrading a natural gas furnace from one with 88% efficiency to one with 92% efficiency, if the heating load is 55 million Btu per year. What will be an ideal response?

Trades & Technology

_____ corrosion occurs between two different types of metal that are placed together or within the same corrosive environment.? ?  

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

In an RL integrating circuit, the output is taken across the inductor

Indicate whether the statement is true or false

Trades & Technology

Thyristor(s) with an anode gate is (are)

A) SCR. B) Triac. C) PUT. D) Diac. E) A and B

Trades & Technology