The common yellowthroat is _____

a. nonmigratory
b. originally from Europe
c. a ground nester
d. secretive and is heard more often than seen


b

Trades & Technology

You might also like to view...

The front wheel bearings are being replaced on a front-wheel-drive vehicle with the wheel bearings pressed into the steering knuckle. Technician A says the vehicle should be driven a short distance in the shop before the front hub nuts are torqued to specifications. Technician B says the hub nut torque supplies the correct wheel bearing adjustment. Who is correct?

A. A only B. B only C. Both A and B D. Neither A nor B

Trades & Technology

(a) A two-story hospital facility shown in Figure P2.18 is being designed in New York with a basic wind speed of 90 mi/h and wind exposure D. The importance factor I is 1.15 and K z = 1.0. Use the simplified procedure to determine the design wind load, base shear, and building overturning moment. (b) Use the equivalent lateral force procedure to determine the seismic base shear and overturning moment. The facility, with an average weight of 90 lb/ft 2 for both the floor and roof, is to be designed for the following seismic factors: S DS = 0.27g and S D1 = 0.06g; reinforced concrete frames with an R value of 8 are to be used. The importance factor I is 1.5. (c) Do wind forces or seismic forces govern the strength design of the building?

Trades & Technology

What are the requirements for the acceptance of contracts?

What will be an ideal response?

Trades & Technology

Total fall clearance calculation factors include ________ distances.

A. six B. four C. two D. ten

Trades & Technology