A mechanical contractor's normal sequence in which drawings are produced in house for a construction

project is _____.

a. coordination drawings, cut lists, shop drawings
b. shop drawings, mechanical plans, cut lists
c. cut lists, shop drawings, mechanical plan
d. shop drawings, coordination drawings, cut lists


d

Trades & Technology

You might also like to view...

Para ser efectivo, un sistema de conexión a tierra debe limitar el voltaje en el sistema eléctrico y protegerlo de todos los casos siguientes EXCEPTO:

a. exposición a rayos. b. sobretensión superior a aquélla para la que se ha diseñado el circuito. c. incremento en el potencial MÁXIMO a tierra debido a voltajes anormales. d. condiciones de infratensión

Trades & Technology

What type of oil delivery system is recommended when the vacuum required for lifting the oil from the tank to the furnace is 16 in Hg?

A) A two-pipe oil delivery system with a single-stage oil pump B) A single-pipe oil delivery system with a single-stage pump C) A two-pipe oil delivery system with a two-stage oil pump D) A single-pipe oil delivery system with a two-stage oil pump

Trades & Technology

How is modulus likely to be affected when toughness modifiers are added to a plastic? Why?

What will be an ideal response?

Trades & Technology

The standard electrode extension for FCAW-S with 0.045" (1.1 mm) wire and an insulating nozzle is _____

a. 1/4" to 3/8" (6 to 9.5 mm) b. 1/4" to 3/4" (6 to 19 mm) c. 1/2" to 1-1/2" (13 to 38 mm) d. 3/4" to 1-1/4" (19 to 32 mm)

Trades & Technology