What is a common cause of repeated shock absorber failures on a trailer with an air suspension?
A. poor quality shocks
B. improper leveling valve ride height
C. wheel ends out-of-balance
D. overloading
Answer: C
You might also like to view...
____ is available for use on very small fractures that occur in concrete, concrete block, and brick walls.
A. Polyurethane sealant B. Epoxy crack filler C. Silicone rubber sealant D. Latex sealant
The cable in Figure P6.3 supports girder DE uniformly loaded with 4 kips/ft. The supporting hangers are closely spaced, generating a smooth curved cable. Determine the support reactions at A and C. If the maximum tensile force in the cable cannot exceed 600 kips, determine the sag hB at midspan.
3/8 ยด 5/8 = __________.
Fill in the blank(s) with the appropriate word(s).
What does the instruction ADD A, Rn do?
A) It adds the contents of memory to the register Rn and places the result in the register Rn. B) It adds the contents of register Rn to the accumulator and places the result in the memory. C) It adds the contents of memory to the register Rn and places the result in the accumulator. D) It adds the contents of register Rn to the accumulator and places the result in the accumulator.