How does additional pressure that is applied to a high-pressure gauge register when connected to a piece of equipment?
A) The Bourdon tube straightens out and moves the needle to indicate pressure.
B) The Bourdon tube flattens out when the mechanical needle to shows pressure.
C) The fluid in the Bourdon tube moves to a higher position to indicate pressure.
D) The Bourdon tube rotates to indicate a change in pressure.
A
You might also like to view...
What is used to switch an electrohydraulic injector (EHI) used in a typical CR fuel system?
A. Pulse width modulated signal B. Analog voltage charge C. Fuel volume in accumulator D. Hydraulic distributor head
The four basic circuit concepts are voltage, current, ____, and watts.
a. induction b. resistance c. friction d. conduction
Uncoated steel nails are called ____ nails.
a.hardened c.bright b.rough d.dull
An onboard automotive computer uses up to ________ of its processing power for self-diagnosis
A) 4% B) 90% C) 40% D) 5 to 10%