How should you check your service brakes are working properly?
a. Park on level ground, chock the wheels, engage the parking brakes when you have the correct amount of air pressure to do so and shut the engine off.
b. Park on slight grade, drain off air pressure, set parking brake and check to the movement.
c. Park on level ground, wait until normal air pressure is reached, release the parking brake and move forward slowly at about 5 mph. Then apply the brakes firmly.
c. Park on level ground, wait until normal air pressure is reached, release the parking brake and move forward slowly at about 5 mph. Then apply the brakes firmly.
You might also like to view...
Technician A says the lower radiator hose suffers the most abuse. Technician B says that a defective hose may be easily determined by outward appearance. Who is right?
A. Technician A B. Technician B C. Both technicians D. Neither technician
Technician A says when testing for maximum alternator output, the battery must be loaded to force the alternator to produce its maximum output. Technician B says that the load should be adjusted to produce 12.0 volts or less. Who is right?
A) Technician A only B) Technician B only C) Both A and B D) Neither A nor B
Using the modified X tire rotation method on a front wheel drive vehicle, where would the right front tire be installed?
A) Left rear B) Right front C) Right rear D) Left front
What is the purpose of the draft diverter on natural draft units?
What will be an ideal response?