In the accompanying figure, what is the purpose of the jog function?
What will be an ideal response?
In the accompanying figure, the purpose of the jog function is to prevent the holding contacts from holding the contactor control coil energized so that the motor continues to run.
You might also like to view...
Baseboard hot water heat is an example of ____________________ heat.
Fill in the blank(s) with the appropriate word(s).
?What is the approximate size that the root face on a beveled edge should be ground to?
A. ?1/64-in (0.4 mm) to 1/32-in (0.8 mm) B. ?1/16-in (1.6 mm) to 1/8-in (3 mm) C. ?1/4-in (6 mm) to 5/16-in (8 mm) D. ?0-in (0 mm)
The horn of a vehicle equipped with a horn relay is blowing very weakly; its sound level is continuous but low in volume. Technician A says the horn relay contacts may have excessive resistance. Technician B says the horn switch may have high resistance. Who is correct?
A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B
The permanent magnetics of the conventional PM motor are magnetized along their length or their width
Indicate whether the statement is true or false