Which statement is true of control arms?
A. Control arms connect the torsion bars and the vehicle frame.
B. Control arms are mounted with copper bushings.
C. Control arms may be two different lengths on the same wheel position.
D. Leaf springs are normally mounted between the control arms.
Answer: C
You might also like to view...
Prior to the arrival of surface mount technology (SMT), there were two designated layers for through-hole printed circuit boards: the ____________________ side and the solder side.
Fill in the blank(s) with the appropriate word(s).
Analyze the steel rigid frame in Figure P14.5. After member end moments are evaluated, compute all reactions and the moment diagram for beam BC.
What suspension component is used to counteract body lean during cornering?
A) Torsion bar B) Strut rod C) Stabilizer bar D) Control arm
Mixed format: 
(with a space between the whole number and the numerator)Fraction format: 
Reduce all fractions. A piece of carbon 
inch thick has a copper plating of 
inch on each side. What is the total thickness?
Fill in the blank(s) with the appropriate word(s).