The indispensable tool for defining parts and features accurately is _________________________
Fill in the blank(s) with correct word
GDT or Geometric Dimensioning and Tolerancing
You might also like to view...
Which of the listed statements represents a valid restriction during personnel-hoisting operations?
a. A platform shall not be positioned less than 20 feet from an energized 480 kV transmission power line. b. Platform raising and lowering speeds must be less than 75 feet per minute. c. The operator may not use the main boom hoist unless the personnel lift is being conducted on a boom extension longer than 20 feet. d. Lift supervision must terminate the lift if wind speeds exceed 20 mph at the level of the platform.
A ____________________ draws debris from the surface of a water feature and prevents it from clogging the pump
Fill in the blank(s) with correct word
As resistors are disconnected from a parallel circuit, ________
A) IT decreases and RT increases B) IT increases and RT increases C) IT decreases and RT decreases D) IT increases and RT decreases
Torque steer can be caused by ________.
A) Unequal length of the shafts B) The tendency for the longer drive shaft to twist C) Unequal CV joint angles D) All of the above