The reflected load in a transformer is defined as the actual load as it appears to the source and results from:

A) the voltage ratio. B) the power ratio. C) the turns ratio. D) the current ratio.


C

Trades & Technology

You might also like to view...

The cabinet part marked A in the figure is a(n) _____.



a. scribe molding
b. end panel
c. face frame
d. shelf support

Trades & Technology

When soldering, flux should be applied to ____.

A. the male part of the joint only B. the female part of the joint only C. both the male and female parts of the joint D. around the mated parts

Trades & Technology

How can the electromagnetic strength of an energized coil of wire be increased?

A) Increase current flow through the coil B) Place an iron core in the middle of the coil C) Increase the number of turns in the coiled wire D) Any of these

Trades & Technology

According to the Universal Designator System for Steel Framing which of the following is not one of the major framing components as noted by the acronym the "Right STUF"?

A) Cold-rolled channel or channel studs B) L-headers with flange stiffeners C) Furring channels D) Stud or joint sections with flange stiffeners (C-shapes)

Trades & Technology