If you have the make and model of the vehicle on the repair order it is not necessary to have the VIN on the repair order

Indicate whether the statement is true or false


FALSE

Trades & Technology

You might also like to view...

What should be done when installing a transmission/transaxle?

A) Connect the cooler lines and tighten them to the correct torque B) Check the linkage for proper adjustment so that the shift interlock works correctly and the PRNDL is aligned with the transmission range switch C) Make sure that the transmission alignment dowels are installed D) All of the above

Trades & Technology

The force F goes through the origin of the xy-coordinate system and makes an angle ???? with the horizontal, as shown in Figure 12.25. Points A and B are at the coordinates indicated on the figure in units of feet. Calculate the moment of F about points A and B, assigning positive values to counterclockwise moments.

F = 3 500 N
???? = 0°

Trades & Technology

When troubleshooting split air conditioning systems be sure to check voltage to:

A) The indoor unit only. B) The outdoor unit only. C) Both the indoor and outdoor units.

Trades & Technology

Why should the technician check the furnace door safety switch after installation?

A) To check the furnace interior for defects in the outgoing vents B) To sync it with the indoor blower C) To test for furnace flashback D) To prevent the furnace from operating with the door removed

Trades & Technology