A Power-limited Class 1 circuit may operate at a maximum of _________.

A. 600V, 1000VA
B. 30V, 1000VA
C. 150V, 1000VA
D. 30V, 100VA


B. 30V, 1000VA

Trades & Technology

You might also like to view...

How does a PV cell receive the highest average insolation?

What will be an ideal response?

Trades & Technology

A(n) ____________________ statement states that the second-place horse is superior to the first-place horse in a certain area, but the first-place horse has more superior qualities.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

Technician A says that the TP sensor signal voltage should be about 0.5 volt at idle and increase to about 2.5 volts at wide-open throttle (WOT). Technician B says A TP sensor can be tested using a DMM, DSO, or scan tool. Who is right?

A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B

Trades & Technology

Compute the deflection of a structural member made of aluminum, if a load of 500 lb is applied to the bar. The member has a uniform rectangular cross-section with the dimensions of ¼ in × 4 in., as shown in the accompanying figure.

Trades & Technology