All of the following are true about OHV camshafts and lifters EXCEPT ____.
A. hydraulic lifters should be tested for leak-down during inspection if they are to be reused
B. the normal shape for the bottom of a lifter is concave
C. new lifters should always be installed on a new camshaft
D. lifters must always be installed on the same lobe for which it was removed
Answer: B
You might also like to view...
Identify the components 1 through 7 in the image below:?
?
What will be an ideal response?
What is the circularity tolerance zone?
What will be an ideal response?
The role of the ___________________ is to convert AC electrical energy to mechanical drive torque.
Fill in the blank(s) with the appropriate word(s).
The leads of a DMM with a diode check function are placed across the terminals of a diode and then reversed. A 0.6 volt reading is obtained in both directions. Technician A says this means the diode is shorted. Technician B says this means the diode is acceptable. Who is correct?
A. Technician A only B. Technician B only C. Both Technician A and B D. Neither Technician A nor B