While having a discussion, Technician A says that a front bearing with excessive clearance will knock. Technician B says that excessive clearance can cause low oil pressure. Who is correct?

A. A only
B. B only
C. Both A and B
D. Neither A nor B


Answer: C

Trades & Technology

You might also like to view...

How is a Pareto chart useful in determining priorities?

What will be an ideal response?

Trades & Technology

When diagnosing an electronic distributor ignition system, a 12-volt test light connected from the negative primary coil terminal to ground flutters while cranking the engine. A test spark tester does not fire when it is connected from the coil secondary wire to ground while cranking the engine. The cause of this problem could be a ________

A) Defective ignition coil B) Defective primary circuit C) Defective ignition module D) Defective pickup coil

Trades & Technology

What is considered a long line application for residential air conditioning?

A) Lines exceeding 100 feet in length or with a vertical rise of more than 30 feet B) Lines exceeding 50 feet in length or with a vertical rise of more than 10 feet C) Lines exceeding 80 feet in length or with a vertical rise of more than 20 feet D) Air conditioning systems can run lines for nearly any length with no problems.

Trades & Technology

The ________ radius is the amount of pliability allowed in fiber cable

Fill in the blank(s) with correct word

Trades & Technology