Which abnormal visual finding might process technicians find with solids handling equipment? (Select all that apply.)
a. Banging or hammering
b. Higher than normal amp readings
c. Meter showing higher than normal speed
d. Dust accumulation
a. Incorrect. While process technicians should listen for abnormal noises, this is not a visual finding.
b. Correct. Process technicians should look for systems pulling higher amps than normal.
c. Correct. Process technicians should be alert for systems operating at higher or lower than normal speeds.
d. Correct. Process technicians should observe for leaks or the accumulation of solids or dust in new areas.
You might also like to view...
According to the NEC®, the small appliance loads in each kitchen area of a dwelling must be served by at least _____.
a. two 120V, 20A small appliance branch circuits b. one 4,050VA small appliance branch circuit c. one 1,500VA, 20A small appliance branch circuit d. two 240V, 10A small appliance branch circuits
In the United States, agricultural exports exceed ____________________
Fill in the blank(s) with correct word
The proper condenser split of most single compressor low temperature condensing units is _________?
a. 20° b. 25° c. 30° d. 40°
The biggest difference in the foundation for a commercial building and that for a small house is the thickness of the concrete and the amount of reinforcing ____.
A. cement B. asphalt C. steel D. hardwood