Answer the following statement(s) true (T) or false (F)
1. Junction diodes are often referred to as PN junctions because they are made by joining a piece of P-type and N-type semiconductor material together.
2. In order for a diode to conduct, the anode must be connected to the more negative voltage and cathode to the more positive.
3. Electronic diagrams are drawn to assume that current flows from negative to positive.
4. The forward voltage of rectifier diodes is low enough that a common ohmmeter can supply enough voltage to cause conduction.
5. The forward voltage of rectifier diodes is low enough that a common ohmmeter can supply enough voltage to cause conduction.
1. True
2. False
3. False
4. True
5. True
You might also like to view...
Two-way beam-and-slab floors normally require support by beams and walls _____.
a. along the perimeter and midline of the slab b. at 20-foot intervals across the shortest dimension c. only at the perimeter d. at 20-foot intervals across the longest dimension
A carbon steel ring, with a piece of soft metal bolted across the middle of the ring is a _____
a. steam target b. test tree c. slip blind d. blind flange
When connecting round metal ductwork, the male end connection should always face toward the air supply.
Answer the following statement true (T) or false (F)
Which type of vehicles most often do not use metering valves?
A) Rear-wheel drive B) Front-wheel drive C) All-wheel drive D) Four-wheel drive