All of these are part of the 3-minute charge test, EXCEPT ________
A) At the end of three minutes, read the voltmeter
B) Charge the battery at a rate of 40 amperes for 3 minutes
C) Connect battery charger and ammeter to the battery terminals
D) Connect battery charger and voltmeter to the battery terminals
C
You might also like to view...
The stator windings for the three major types of three-phase motors – squirrel cage, wound rotor, and ____ – are basically the same.
a. synchronous b. stator c. bearing end brackets d. reversible
What SketchUp tool do you need in order to create edges in a counter that you can use to cut a hole for the sink?
What will be an ideal response?
What results from increasing rocker ratio?
A. Decrease in output travel at the pallet end of the rocker arm. B. Decrease in mechanical advantage. C. Increase the amount of pushrod travel. D. Increase the output travel at the pallet end of the rocker arm.
Carry the answer to three decimal places. A set of 2-inch-wide by 
-inch-thick carbon brushes fits the brush holders too tightly. It is necessary to take 
inch off the width and 0.015 inch off the thickness by sanding. Give in decimal form the thickness dimension of the carbon brushes after sanding.
Fill in the blank(s) with the appropriate word(s).