List four conditions that apply when a position tolerance is applied at RFS
What will be an ideal response?
ANS:
Where a position tolerance is applied at RFS, four conditions apply:
1. No bonus tolerance is permitted.
2. The axis/center plane interpretation is used.
3. The tolerance zone is located and oriented by the basic dimensions.
4. The deviations of orientation and location of the toleranced feature are controlled.
You might also like to view...
A Hall generator is not affected by dirt, oil, or vibration.
Answer the following statement true (T) or false (F)
What refrigerant piping technique helps to get oil to flow up a suction-line riser along with vapor?
a. Selecting a line size that results in a very low velocity b. Selecting a line size that is one or two sizes larger than the rest of the line c. Installing a trap at the bottom of the riser d. Installing a liquid-to-suction heat exchanger
When locating holes using positional tolerancing, the location dimensions must be _________.
Fill in the blank(s) with the appropriate word(s).
Find the circumference of a 3 3/16-inch diameter circle to the nearest thousandth of an inch.
A. 10.014 B. 10.524 C. 10.655 D. 11.001