Determine the voltage vo between nodes A and B in Figure P2.67.
vS = 12V
R1 = 11 k? R3 = 6.8k?
R2 = 220 k? R4 = 0.22M?
Known quantities:
Schematic of the circuit shown in Figure P2.67 with source voltage, ; and resistances,
Find:
The voltage between nodes A and B.
Analysis:
The same current flows through R1 and R3. Therefore, they are connected in series. Similarly, R2 and R4 are connected in series.
SPECIFY THE ASSUMED POLARITY OF THE VOLTAGE BETWEEN NODES A AND B. THIS WILL HAVE TO BE A GUESS AT THIS POINT.
Specify the polarities of the voltage across R3 and R4 which will be determined using voltage division. The actual polarities are not difficult to determine. Do so.
The voltage is negative indicating that the polarity of is opposite of that specified.
A solution is not complete unless the assumed positive direction of a current or assumed positive polarity of a voltage IS SPECIFIED ON THE CIRCUIT.
You might also like to view...
________ are the most abundant cell population of the formed elements of blood.
A) Erythrocytes B) Platelets C) Neutrophils D) Lymphocytes E) Monocytes
Two technicians are discussing A/C systems. Technician A says that the TXV system uses a receiver–drier mounted in the suction line. Technician B says that the orifice tube system uses an accumulator in the suction line. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
?At the end of a spark plug deposit test, what must be done before the engine is accelerated off idle?
What will be an ideal response?
The purpose of air conditioning is to ____________________
A) Remove dust and pollen. B) Remove moisture. C) Remove heat. D) All of the above.