How many bits are required for the output of an ADC that has 15 quantization levels?
A) 16 B) 4 C) 8 D) 2
B
You might also like to view...
A defective PCV valve can cause:
A. Increased HC emissions B. Oil sludge C. Oil leaks D. All of the above
The minimum box width for U pulls must include ____.
A. 6 in. between raceways B. the thickness of the two raceways C. 12 in. between raceways plus the thickness of the two raceways D. the average pull length plus the thickness of the two raceways
The oil drains back to the oil pan through _________
A) The camshaft B) The pushrods C) Drainback holes D) Drain pumps
Overheating can cause a terminal to discolor or the wiring insulation to melt. What should you consider when repairing the wire or the terminal?
A) It is recommended to replace the entire wire with another wire of the same or larger gauge. If the terminal is on a relay, sequencer, or fuse block, only the wire needs to be replaced. The component does not need to be replaced. B) It is recommended to replace the entire wire with another wire of the same or larger gauge. If the terminal is on a relay, sequencer, or fuse block, the component should also be replaced in addition to the wire. C) Replace the terminal end only. It is okay to cut off the end and repair the wire. If the terminal is on a relay, sequencer, or fuse block, only the wire needs to be replaced. The component does not need to be replaced. D) Replace the terminal end only. It is okay to cut off the end and repair the wire. If the terminal is on a relay, sequencer, or fuse block, the component should also be replaced in addition to the wire.