Of the choices listed, which is the best method of troubleshooting an instrumentation problem?
A. Replace components starting with the sensor or sending unit until the instrumentation is working correctly.
B. Short the wiring at the associated sensor or sending unit to ground to determine if the wiring is OK.
C. Pierce the wire insulation at the sending unit with a test light to determine if voltage is present.
D. Use OEM-provided information and procedures to troubleshoot the cause of the instrumentation problem.
Answer: D
You might also like to view...
The mare is a seasonally polyestrous species.
Answer the following statement true (T) or false (F)
Although any receding angle from 0 degrees to 90 degrees may be used for an oblique drawing, angles between 30 degrees and ____________________ degrees should be used, which minimizes the distortion and elongation.
Fill in the blank(s) with the appropriate word(s).
Which part of an antilock brake system is used for tire pressure monitoring?
A) Hydraulic control module B) Yaw sensor C) Brake pedal position (BPP) sensor D) Wheel speed sensors
Panels designed by engineers to resist lateral loads are referred to as shear panels.
Answer the following statement true (T) or false (F)